Eco-Friendly l Controllable l Intelligent ID l Ease of Installation
FIlament
Anycubic PLA Basic 1kg - Refill
rate_review Be the first to review
NPR
1,900
alarm
Promo Ends In: 00:00:00
Out of Stock
Select Color
Quantity
compare_arrows
Compare with FIlament
1
Anycubic PLA Basic Refill Filament
Ways to Obtain Anycubic Filament Spools
1. Purchase Anycubic's reusable spools.
2. Reuse your previous spools.
3. Print your own spool from Makeronline.
Stronger Adhesion
The special surface treatment on the cool plate offers PLA filaments extremely strong adhesion at just 45°C. Effectively decreases the possibilities of warping and bottom layer separation when printing smaller parts and large-scale models.
Vibrant Colors
A vast selection of colors opens up more possibilities for creativity and your next project.
Anycubic PLA Basic Refill Filament Characteristic
Boosting Efficiency with Intelligent Identification
The filaments feature intelligent identification chips that integrate seamlessly with the ACE Pro, allowing for automatic identification of printing information and enhancing the printing experience.
*The intelligent identification feature requires an internet connection and Anycubic-brand intelligent identification-compatible filaments.
Filament Installation
1. Label the Filament
Remove both stickers and both chips. (if present.) Install new chip stickers onto both flanges.
Remove both stickers and both chips. (if present.) Install new chip stickers onto both flanges.
2. Load the Filament
Open the spool, align the filament with the latch, and snap it into place.
Open the spool, align the filament with the latch, and snap it into place.
3. Locking the Spool
Close the spool, press firmly, and rotate until you hear a “click," confirming it's locked.
Close the spool, press firmly, and rotate until you hear a “click," confirming it's locked.
Product Feature Image
Technical Specifications
Detailed hardware & material parameters
| Item | Specification |
|---|---|
| General | |
| Brand | ANYCUBIC |
| Category | FIlament |
| Preparations | |
| Dry Out Before Use | Recommended |
| Drying Condition | 45-50 ℃, 6-8 h |
| Ace Compatibility | Compatible |
| Nozzle Size | Recommended 0.2 mm or above |
| Printing Parameters | |
| Printing Temperature | 190-230 ℃ |
| Heated Bed Temperature | 55-56 ℃ |
| Recommended Printing Speed | 50-200 mm/s |
| Cooling Time | 8 s |
| Maximum Volume Speed (Flow Rate) | 12 mm³/s |
| Physical Properties | |
| Density | 1.24 g/cm³ |
| Melt Index | 4~10 g/10 min (190 ℃/2.16 kg) |
| Melting Point Temperature | 166 ℃ |
| Vicat Softening Temperature | 55 ℃ |
| Heat Deflection Temperature (0.45Mpa) | 54 ℃ |
| Mechanical Properties | |
| Young's Modulus | 2534±85 Mpa |
| Tensile Strength | 48±5 Mpa |
| Elongation At Break | 8±1% |
| Bending Modulus | 3360±100 Mpa |
| Bending Strength | 90±3 MPa |
| Lzod Lmpact Strength (X Y) | 22±2 kJ/m² |
| Tensile Strength (Z) | 26±1 MPa |
| Filament Characteristic | |
| Filament Type | General filaments |
| Recommend To Print | Toys, decorative parts, and fandom |
| Intelligent Identification | Supported |
| Reusable Filament Spool | Supported |
Customer Reviews
rate_review
No reviews yet
Be the first to share your experience!
Frequently Asked Questions
How do I get warranty & technical support?
All products sold by Blanc include 1-year official hardware warranty and lifetime technical assistance via our support ticket portal.
What is the shipping time within Nepal?
Orders inside Kathmandu Valley are delivered within 24 hours. Outside valley orders take 2-3 business days via express courier.
Is assembly required upon unboxing?
Printers and accessories arrive pre-calibrated or semi-assembled with clear quick-start guides for 15-minute setup.